Ford Ranger Forums

Discussion Categories => Suspension Discussion => Topic started by: Dyllan on January 12, 2010, 04:25:57 PM

Title: Camber
Post by: Dyllan on January 12, 2010, 04:25:57 PM: After installing the new D35, my camber is way off. \---/ I understand i can fix this with new camber bushings. Can i install coil spacers and camber bushings and still be level? How do i know which camber bushings?
Title: Re: Camber
Post by: rngrdanny22 on January 12, 2010, 07:56:30 PM: I would recommend buying the camber bushings that come with the Skyjacker lift kits... and then I would take it to a shop to get a proper alignment... That's one thing I've never attempted... LOL
Title: Re: Camber
Post by: PlumCrazy on January 12, 2010, 08:00:07 PM: Get it on an alignment rack somewhere so they can tell you how far out of spec your are. Then buy bushings with an adjustment range that contains the camber correction you need. Get the Moog (or Skyjacker) 2-peice bushings, they can be dialed in much more precisely than the one piece design.
Title: Re: Camber
Post by: Dyllan on January 12, 2010, 08:03:09 PM: are they expensive?
Title: Re: Camber
Post by: cvalcore on January 13, 2010, 02:06:14 AM: i think i payed like $30 bucks a peace for mine and i got them at napa.
Title: Re: Camber
Post by: PlumCrazy on January 13, 2010, 09:32:47 AM: The two piece ones are like 25-30 bucks a piece and are adjustable from 0-4 degrees.
Title: Re: Camber
Post by: BADINTEN on February 06, 2010, 10:31:54 AM: i have seen the two piece for $60 and it gives you 6degrees of adj